Functional coating · Easy-clean surface
Anti-graffiti coated aluminum coil.
Anti-graffiti coated aluminum is coil painted with a finish that spray paint and marker ink do not bond to strongly, so the marks can be cleaned off without repainting the panel. Orbit offers an anti-graffiti finish on coated aluminum coil, applied on its own coil line in Aqaba, Jordan, before the metal is formed into panels, shutters or signs.
- Coated coil up to 1.60 mm thick
- Up to 1350 mm wide
- RAL or custom color
- MOQ 6.5 MT
What does an anti-graffiti coating do?
An anti graffiti coating makes a surface easier to clean after it has been sprayed, tagged or marked. Graffiti paint normally soaks into or bonds tightly to a painted surface. An anti-graffiti surface limits that bond, so the paint sits on top and can be lifted off with the cleaning method the coating supplier specifies. The aim is to remove the graffiti without removing or damaging the finish underneath.
Anti-graffiti coatings fall into two broad types:
- Permanent (non-sacrificial): a hard, durable film that stays in place when graffiti is cleaned off. It is designed to be cleaned many times over its life without being reapplied.
- Sacrificial: a clear layer that is removed together with the graffiti during cleaning. It has to be reapplied after each cleaning, so it suits surfaces where on-site maintenance is planned anyway.
A finish applied on a coil line is cured into the paint system, so it is a permanent or semi-permanent type; the system data confirms which. Some products sit between the two types; if your specification names one, include that wording in the RFQ.
Where are anti graffiti panels used?
These panels are used where surfaces are within reach of the public and repeat tagging is expected:
- Transit: stations, platforms, shelters, underpasses and the panels around them.
- Public facades: ground-floor cladding on schools, car parks, sports halls and civic buildings. The aluminum cladding page covers the coil for this use.
- Signage: painted information boards, sign backs and panels, where tags make the message hard to read. Retroreflective sign faces are protected by the sheeting maker's own overlay products. See the signage page for substrate and coating points.
- Rolling shutters: shop and garage shutters that face the street when closed. The roller shutter coil page covers the coil for shutter slats.
How does a coil-applied finish differ from a field-applied coating?
A field-applied anti-graffiti coating is brushed, rolled or sprayed onto a surface that is already installed. It can be added to existing walls and renewed on site, but the result depends on surface preparation, weather and the skill of the applicator, and the film can vary in thickness from one area to the next.
A coil-applied, or factory, finish goes on the flat strip on a continuous line, under controlled conditions, and is cured in an oven before the coil is slit, cut or formed. The film thickness and cure are controlled along the whole coil, and the panels arrive on site already protected, with no extra coating step after installation. The trade-off is that the finish has to be chosen at the ordering stage, and it has to tolerate the forming step, because the metal is bent after it is painted. State the forming method and the tightest bend in the RFQ so the paint system can be checked against them.
How is graffiti cleaned off a coil-applied finish?
Cleaning depends on the paint system, the type of graffiti and how long it has been on the surface, so the coating supplier's cleaning instructions are the reference. General good practice:
- Test a small area first: try the cleaning method on a small, out-of-sight part of the panel before cleaning a whole elevation.
- Use the approved method only: follow the coating supplier's instructions for cleaning agents, tools and water pressure. Products or abrasive tools that the supplier has not approved can dull or damage the finish.
- Clean promptly: graffiti is generally easier to remove soon after it is applied than after it has been left for a long time.
Orbit's cleaning guidance and performance data for a given anti-graffiti system and color are available on request.
Anti-graffiti coated aluminum from Orbit.
What Orbit confirms for coated coil. Anything not listed here is available on request and confirmed per order.
| Finish | Anti-graffiti finish offered on coated aluminum coil |
|---|---|
| Substrate | Aluminum in 1xxx, 3xxx and 5xxx series alloys. 3105 is the main coated substrate. |
| Coated thickness | Up to 1.60 mm |
| Coated width | Up to 1350 mm |
| Coil weight | Up to 10 tonnes |
| Color | RAL or custom color matching |
| Warranty | 5 to 20 years, depending on application and environment |
| Minimum order | 6.5 MT, typically 6 MT per color on coating |
| Standards and documents | ASTM or EN depending on market. Material certificates with every batch. |
| Performance figures and test data | Available on request |
Slitting and cut-to-length are done on the same site, so anti-graffiti coated coil can ship as master coil, slit coil or sheet. The finish is one of the options on Orbit's prepainted aluminum coil, and it sits alongside the other functional coatings such as the anti-bacterial finish.
How to specify an anti-graffiti finish
An anti-graffiti order is easier to quote when the specification covers these points:
- Application and exposure: what the panels are for, where they will be installed and how much sun and weather they will see.
- Performance requirement: any test method or standard your project names for graffiti resistance or cleanability. Test data is available on request.
- Color and gloss: a RAL number or a physical sample, plus the gloss level.
- Alloy, temper, thickness and width: the substrate has to suit the forming step as well as the coating.
- Forming method: roll forming, bending or folding, and the tightest bend radius.
- Quantity per color: each color is a separate coating run.
Orbit replies to an RFQ within one business day.
Anti-graffiti finish questions.
What is anti-graffiti coated aluminum?
It is aluminum coil painted with a finish that graffiti paint and ink do not bond to strongly, so marks can be cleaned off without repainting the panel.
What is the difference between permanent and sacrificial anti-graffiti coatings?
A permanent coating stays in place when graffiti is cleaned off and can be cleaned repeatedly. A sacrificial coating is removed together with the graffiti and has to be reapplied after each cleaning.
Is a coil-applied anti-graffiti finish better than a field-applied one?
They suit different jobs. A coil-applied finish is cured on the line under controlled conditions and arrives on new panels ready to install. A field-applied coating can be added to existing surfaces and renewed on site.
How do you clean graffiti off anti-graffiti panels?
Follow the coating supplier's cleaning instructions, test the method on a small hidden area first, and clean as soon as practical. Unapproved products or abrasive tools can damage the finish.
Can anti-graffiti coated aluminum be formed after painting?
Coil coatings are designed to be formed after painting. How tight a bend the finish will take depends on the alloy, temper, thickness and paint system, so state the forming step in your RFQ.
Does Orbit publish test data for its anti-graffiti finish?
Performance figures and test data for a given system and color are available on request. Send any standard your project names with the RFQ. One published method is ASTM D6578, a standard practice for evaluating the graffiti resistance of coatings by how a defined set of markings is removed with a defined set of cleaning agents; it is intended for smooth surfaces.
What is the minimum order for an anti-graffiti color?
The minimum order is 6.5 MT, and coating is typically run at 6 MT per color.
Anti-graffiti project to quote?
Send the application, alloy, thickness, width, color, quantity and destination, plus any standard your specification names. We respond to RFQs within one business day.
