Coating system · Polyurethane
PUPA and PU coated aluminum coil.
A PUPA coating is a polyurethane-polyamide coil coating, and PU is a polyurethane coating. Both are specified for flexibility and abrasion resistance on parts that are roll formed and then rub, slide or flex in service, such as rolling shutter slats. Orbit applies PUPA and PU systems in Aqaba, Jordan, on aluminum it casts and rolls on the same site.
- Coated coil up to 1.60 mm thick
- Up to 1350 mm wide
- RAL or custom color
- MOQ 6.5 MT
What is a PUPA coating?
PUPA stands for polyurethane-polyamide. The binder, the resin that holds the pigment and forms the paint film, has a polyurethane base with a polyamide component. The aim is a tough film that resists abrasion and marring while staying flexible enough to be formed after painting.
PU stands for polyurethane. A PU coating uses a polyurethane binder and is also chosen for flexibility and abrasion resistance, where mechanical toughness and moderate exterior performance are needed. In practice the two are close relatives, and the right choice depends on the part, the forming step and the paint system data. A PU coated aluminum coil and a PUPA coated coil are made on the same line in the same way: the strip is cleaned and pretreated, primed, then given the color coat, with each coat cured in an oven.
Neither name fixes a performance level on its own. Formulations differ between paint systems, so hardness, flexibility and abrasion values should be confirmed on the paint system data sheet for the color you order.
Why are PUPA and PU used on rolling shutters?
A rolling shutter slat is a good example of the duty these coatings are specified for. The slat is roll formed from narrow coated strip, often with tight profiles and interlocking edges. In service it winds onto a drum each time the shutter opens, and its edges run in side guides. The paint film is bent hard once during forming, then rubbed and flexed every day after that.
A coating that cracks at the bends or wears through where the slats touch will show bare metal early. PUPA and PU systems are specified to resist that kind of wear. The roller shutter coil page covers alloy, thickness and coating for this market, and the rolling shutter coil guide goes into alloy and thermal choices in more detail.
The same logic applies to other roll-formed profiles that are handled often or rub against each other in use.
Which values should the paint system data sheet confirm?
For a high-wear part, ask for these properties on the data sheet and compare systems using the same methods:
| Property | What it tells you | Example methods |
|---|---|---|
| Flexibility (T-bend) | How tight a fold the film takes without cracking or losing adhesion | ASTM D4145, EN 13523-7 |
| Impact resistance | How the film copes with rapid deformation | ASTM D2794 |
| Film hardness | Resistance to scratching and marring | ASTM D3363 pencil test |
| Adhesion | How well the film holds to the primed metal | ASTM D3359 tape test |
| Abrasion resistance | How the film stands up to rubbing wear | Method stated on the data sheet |
| Gloss | Surface sheen at defined angles | ASTM D523, EN 13523-2 |
The pencil hardness test page explains how film hardness is rated.
Recycled content on PUPA coated coil
Orbit melts and casts its own metal in Jordan, which lets it trace recycled input through to the coated coil. On that basis, roughly 75% recycled content is achievable on select coated coil, for example a 3105 substrate with a PUPA coating, confirmed per order and traceable to the cast batch. The recycled aluminum page explains how recycled content is stated and documented.
PUPA and PU coated aluminum coil from Orbit.
What Orbit confirms for coated coil. Anything not listed here is available on request and confirmed per order.
| Coating systems | PU and PUPA are among Orbit's confirmed systems: PE, HDPE, PVDF, PU, PUPA, Epoxy, Acrylic and Epoxy-PE |
|---|---|
| Substrate | Aluminum in 1xxx, 3xxx and 5xxx series alloys. 3105 is the main coated substrate. |
| Coated thickness | Up to 1.60 mm |
| Coated width | Up to 1350 mm |
| Coil weight | Up to 10 tonnes |
| Color | RAL or custom color matching |
| Finishes | Solid, metallic, woodgrain, brushed, matte, gloss and textured |
| Recycled content | About 75% achievable on select coated coil, for example 3105 with PUPA. Confirmed per order, traceable to the cast batch. |
| Warranty | 5 to 20 years, depending on application and environment |
| Minimum order | 6.5 MT, typically 6 MT per color on coating |
| Standards and documents | ASTM or EN depending on market. Material certificates with every batch. |
| Test data for a PUPA or PU system | Available on request |
Slitting, cut-to-length and embossing are done on the same site, so shutter makers can order slit coil cut to their roll former. See prepainted aluminum coil for the product as a whole and aluminum coil finishes for the surface options.
How to specify a PUPA or PU finish
A PUPA or PU order is quicker to quote, and easier to check on delivery, when the specification covers these points:
- Part and forming step: what is being made, the profile, and how the part moves or rubs in service.
- Coating system: PUPA or PU on the face, and the coat on the reverse side.
- Color and gloss: a RAL number or a physical sample, plus the gloss level.
- Alloy, temper, thickness and slit width: the substrate has to suit the roll former as well as the coating.
- Test data: the properties and methods you want reported, such as T-bend, hardness and abrasion.
- Recycled content: state it if you need it, so it can be confirmed for your order.
- Quantity per color: each color is a separate coating run.
Orbit replies to an RFQ within one business day.
PUPA and PU coating questions.
What does PUPA stand for?
PUPA stands for polyurethane-polyamide, a coil coating with a polyurethane base and a polyamide component, specified for flexibility and abrasion resistance.
What is the difference between PU and PUPA?
PU uses a polyurethane binder, while PUPA adds a polyamide component to a polyurethane base. Both are chosen for flexibility and abrasion resistance, and the exact difference for a given system is shown on its data sheet.
Why is PUPA used for rolling shutter slats?
Shutter slats are roll formed, then wind onto a drum and run in side guides every day. PUPA is specified to take the forming bends and resist the rubbing wear that follows.
Can PUPA coated aluminum have recycled content?
Yes. Roughly 75% recycled content is achievable on select coated coil, for example a 3105 substrate with a PUPA coating, confirmed per order and traceable to the cast batch.
Where can I find hardness and abrasion values for a PUPA system?
On the paint system data sheet for the color you order. Orbit provides test data for a system on request.
What is the minimum order for a PUPA color?
The minimum order is 6.5 MT, and coating is typically run at 6 MT per color.
PUPA or PU coil to quote?
Send the part, alloy, thickness, slit width, coating system, color, quantity and destination. We respond to RFQs within one business day.
