Coating system · High-durability polyester
HDPE coated aluminum coil.
HDPE coated aluminum is coil painted on a continuous line with a high-durability polyester topcoat. It is formulated to hold color and gloss outdoors better than standard polyester, usually at a lower price than PVDF, which suits roofing, gutters and general exterior work. Orbit applies HDPE systems in Aqaba, Jordan, on aluminum it casts and rolls on the same site.
- Coated coil up to 1.60 mm thick
- Up to 1350 mm wide
- RAL or custom color
- MOQ 6.5 MT
What is HDPE coated aluminum?
On a coated coil specification, HDPE means high-durability polyester (some data sheets write high-durable polyester). It is not high-density polyethylene, the plastic that shares the same initials. The binder in the topcoat, the resin that holds the pigment and forms the film, is a polyester formulated for better resistance to ultraviolet light and weathering than a standard polyester.
The reason that matters: outdoors, ultraviolet light and moisture slowly break down polyester binders. The surface chalks and loses gloss, and the color drifts. A high-durability polyester is formulated to slow that process compared with standard polyester in the same exposure. How much slower depends on the paint system, the color and the site, so the figures that count are the ones on the paint system data sheet and in the test data for your color.
HDPE goes on the strip the same way as other coil coatings. The aluminum is cleaned and pretreated, a primer is applied and cured, then the HDPE color coat is applied and cured in an oven. The coil coating process guide explains each stage. Because the strip is painted flat and formed afterward, the film is designed to bend with the metal during roll forming and folding.
Where is HDPE coated aluminum used?
HDPE is chosen for exterior parts that see real weather, where standard polyester would fade too soon for the owner and PVDF would cost more than the project needs:
- Roofing: profiled and standing seam roof sheet on homes, farm buildings and commercial roofs. The aluminum roof coil page covers alloy and thickness for this market.
- Gutters and downspouts: profiles roll formed from narrow coil, where formability and color retention both count. See gutter coil for the coil itself.
- General exterior: wall panels, soffits, fascia, flashings and trim on buildings away from severe coastal or industrial exposure.
For buildings close to the sea, in strong sun or with long design lives, a fluoropolymer system is usually the safer match. The guide to choosing a coating system by environment shows how exposure drives that decision.
How does HDPE compare with PE and PVDF?
All three are polymer topcoats applied on a coil line and formed after painting. They differ mainly in how long color and gloss last outdoors and in price. The positions below are relative and assume the same color, site and coat build.
| System | Binder | Outdoor color and gloss retention | Price position | Usual uses |
|---|---|---|---|---|
| PE | Standard polyester | Lowest of the three | Lowest | Interiors, sheltered and moderate exposure |
| HDPE | High-durability polyester | Better than PE | Moderate premium over PE | Roofing, gutters, general exterior |
| PVDF | Fluoropolymer, usually 70 percent PVDF resin | Highest of the three | Highest | Facades, architectural roofing, coastal and high-UV sites |
The full side-by-side, with how to pick between them for a given project, is in the PE vs PVDF vs HDPE comparison. Standard polyester has its own page under polyester coated aluminum coil, and the fluoropolymer option is covered on the PVDF coated aluminum page.
What should an HDPE coating data sheet show?
Because performance depends on the paint system, ask for its data sheet and compare like with like. An HDPE coating is usually described by these properties:
- Gloss: specular gloss measured at defined angles, for example to ASTM D523 or EN 13523-2.
- Color change after exposure: reported as a color difference value. The Delta E color difference page explains how it is calculated.
- Accelerated weathering: exposure in a fluorescent UV lamp apparatus operated to ASTM G154. Results compare systems with each other; they are not a forecast of years outdoors.
- Flexibility: T-bend results, for example to ASTM D4145 or EN 13523-7, which show how tight a fold the film takes without cracking.
- Film thickness: the dry film thickness of primer and topcoat, for example to EN 13523-1.
HDPE coated aluminum coil from Orbit.
What Orbit confirms for coated coil. Anything not listed here is available on request and confirmed per order.
| Coating system | HDPE is one of Orbit's confirmed systems: PE, HDPE, PVDF, PU, PUPA, Epoxy, Acrylic and Epoxy-PE |
|---|---|
| Substrate | Aluminum in 1xxx, 3xxx and 5xxx series alloys. 3105 is the main coated substrate. |
| Coated thickness | Up to 1.60 mm |
| Coated width | Up to 1350 mm |
| Coil weight | Up to 10 tonnes |
| Color | RAL or custom color matching |
| Finishes | Solid, metallic, woodgrain, brushed, matte, gloss and textured |
| Warranty | 5 to 20 years, depending on application and environment |
| Minimum order | 6.5 MT, typically 6 MT per color on coating |
| Standards and documents | ASTM or EN depending on market. Material certificates with every batch. |
| Test data for an HDPE system | Available on request |
Slitting, cut-to-length and embossing are done on the same site, so HDPE coated coil can ship as master coil, slit coil or sheet. See painted aluminum coil for the product as a whole and the finishes range for surface options.
How to specify an HDPE finish
An HDPE order is quicker to quote, and easier to check on delivery, when the specification covers these points:
- Coating system: HDPE on the face, and the coat on the reverse side.
- Color and gloss: a RAL number or a physical sample, plus the gloss level.
- Alloy, temper, thickness and width: the substrate has to suit the forming step as well as the coating.
- Exposure: distance from the coast, industrial atmosphere and the part of the building, because warranty terms depend on them.
- Test data: the properties and methods you want reported for the system and color.
- Quantity per color: each color is a separate coating run.
Orbit replies to an RFQ within one business day.
HDPE coated aluminum questions.
What does HDPE mean on a coated aluminum specification?
It means high-durability polyester, a polyester topcoat formulated for better outdoor durability than standard polyester. It does not mean high-density polyethylene.
Is HDPE better than standard polyester outdoors?
It is formulated to keep color and gloss longer than standard polyester in the same exposure. How much longer depends on the paint system, the color and the site, so compare the data for the systems on offer.
When should PVDF be chosen instead of HDPE?
PVDF is usually the better match for coastal sites, strong sun, signature colors and buildings with long design lives, where its higher price buys longer color and gloss retention.
Can HDPE coated aluminum be roll formed?
Yes. Coil coatings are designed to be formed after painting. How tight a bend the finish takes depends on the alloy, temper, thickness and paint system, so state the forming step in your RFQ.
What warranty applies to HDPE coated coil from Orbit?
Orbit's warranty runs from 5 to 20 years depending on the application and the environment. The term for a given order is confirmed at quote stage.
What is the minimum order for an HDPE color?
The minimum order is 6.5 MT, and coating is typically run at 6 MT per color.
HDPE coil to quote?
Send the application, alloy, thickness, width, color, quantity and destination. We respond to RFQs within one business day.
