Finish · Effect color
Metallic aluminum sheet and coil.
Metallic aluminum sheet is coated aluminum whose paint film carries metallic flake pigment, so the surface has a sheen that changes as you move past it. The effect is in the coating, not the metal, and it has to be approved on a physical sample viewed from an agreed direction. Orbit coats metallic finishes in Aqaba, Jordan, on aluminum it casts and rolls itself.
- Coated coil up to 1.60 mm thick
- Up to 1350 mm wide
- RAL or custom color matching
- MOQ 6.5 MT
What makes a metallic aluminum sheet finish look metallic?
A solid color scatters light evenly, so it looks much the same from any angle. A metallic coating contains small, flat flakes of metallic pigment spread through the paint film. Each flake reflects light like a tiny mirror. Viewed near the mirror angle of the light source, more light returns from the flakes and the panel looks bright; viewed away from that angle, it looks darker. That shift with viewing angle is what gives a metallic finish its depth.
How strong the shift is depends on the size, amount and alignment of the flakes, and on the color around them. In general coil-coating practice, some metallic colors are finished with a clear coat over the pigmented layer, which protects the flakes and sets the final gloss. Whether a given metallic color needs one is decided by the coating system and the color.
Metallic is one of the finishes for coated coil that Orbit supplies, alongside solid, wood grain, brushed, matte, gloss and textured.
Where is metallic aluminum coil used?
In the wider market, metallic aluminum coil is chosen where a part should read as metal but needs the color range and protection of a coating. General uses include:
- Facades and cladding: wall panels where the sheen changes with daylight across the building.
- Composite panels: panel skins in silver, champagne, bronze and other metal tones.
- Signage: sign trays and faces that need a metal look with a painted surface.
- Roofline and trim: fascia and trim matched to metallic wall panels.
For exterior work, durability depends on the resin system more than on the pigment. In the same exposure, a fluoropolymer system will usually hold its color and gloss longer than a standard polyester, at a higher price. Compare the PVDF option for exterior metallic finishes when the site is sunny or coastal. For a line pattern instead of an even sheen, see the brushed aluminum finish.
How to specify and approve a metallic color
A metallic color cannot be fully defined by a number. Most RAL Classic numbers are solid colors, and the range includes a few metallic-effect references, but a RAL number identifies a color: it does not by itself define a metallic flake. Two metallic coatings with the same nominal color can look different because the flake differs. Approve a physical sample before the production run and agree these points:
- Viewing direction: the angle and the side from which the sample is judged, and which edge of the sample corresponds to the coil length.
- Light source: a light both sides agree on, since metallic finishes can change more than solid colors between daylight and shop lighting.
- Gloss: the gloss level of the top layer, which changes how the flake shows.
- Panel orientation on site: metallic panels are usually installed all the same way round relative to the coil direction, because a panel turned end for end can look slightly different from its neighbor.
Instrument checks help, with limits. A color measurement taken at a single angle does not fully capture how a metallic finish changes with viewing angle, so a single-angle Delta E color check supports the visual approval rather than replacing it.
| Substrate | Aluminum in 1xxx, 3xxx and 5xxx series alloys. 3105 is the main coated substrate. |
|---|---|
| Coated thickness | Up to 1.60 mm |
| Coated width | Up to 1350 mm |
| Coating systems | PE, HDPE, PVDF, PU, PUPA, Epoxy, Acrylic, Epoxy-PE. System for a metallic color confirmed per order. |
| Color | RAL or custom color matching, approved on a physical sample |
| Warranty | 5 to 20 years, depending on application and environment |
| Minimum order | 6.5 MT, typically 6 MT per color on coating |
For one elevation, keep panels from the same production batch where possible. Every batch ships with material certificates. Metallic finishes are part of Orbit's prepainted aluminum coil range, and Orbit replies to an RFQ within one business day.
Metallic finish questions.
Why does a metallic panel look lighter or darker from different angles?
The flat metallic flakes in the paint film reflect light in one main direction. Viewed near the mirror angle of the light source, more light returns from the flakes and the panel looks bright; viewed away from that angle, it looks darker. So the same panel looks lighter or darker as you move.
Can I order a metallic color by RAL number?
A RAL number identifies a color, but it does not by itself define a metallic flake. Metallic colors are agreed on a physical sample, whether the target is a RAL reference or a custom match.
Does a metallic coil coating need a clear coat?
Some metallic colors are finished with a clear coat over the pigmented layer and some are not. It depends on the coating system and the color, and it is confirmed per order.
Can a Delta E reading approve a metallic color?
Not on its own. A single-angle measurement does not fully capture how a metallic finish changes with viewing angle, so visual approval of a physical sample under agreed light and viewing direction comes first.
What is the minimum order for a metallic finish?
The minimum order is 6.5 MT, and coating is typically run at 6 MT per color.
Metallic color to quote?
Send the application, the color target or a physical sample, alloy, thickness, width, quantity, site exposure and destination. We respond to RFQs within one business day.
