Coating system · Epoxy
Epoxy and epoxy-PE coated aluminum coil.
Epoxy coated aluminum carries a paint layer whose binder is an epoxy resin, chosen for strong adhesion and corrosion protection. Epoxy has poor UV stability, so on coil it is used mainly as a primer, as the backer coat on the reverse side and for interior uses. Epoxy-PE pairs epoxy adhesion with a polyester topcoat. Orbit applies both in Aqaba, Jordan, on aluminum it casts and rolls on the same site.
- Coated coil up to 1.60 mm thick
- Up to 1350 mm wide
- RAL or custom color
- MOQ 6.5 MT
What is epoxy coated aluminum?
An epoxy coating is a paint whose binder, the resin that holds the pigment and forms the film, is an epoxy resin. On a coil line it is applied as a liquid and cured in an oven, where it cross-links into a hard film that bonds well to pretreated aluminum. That bond, and the barrier the film forms against moisture, are the reasons epoxy is valued in coil coating.
Its weakness is sunlight. Ultraviolet light breaks down an epoxy film at the surface, so it chalks and changes color outdoors sooner than a polyester or PVDF topcoat in the same exposure. For that reason epoxy is rarely left as the outer coat on a face that sees the sun. It does its work underneath a topcoat, on the reverse side of the strip, or indoors.
Where does epoxy go in a coil coating system?
A coated coil is built in layers: pretreatment, primer, then a topcoat on the face, with a separate coat on the reverse side. Epoxy can sit in several of those positions.
| Position | What epoxy does there | What goes on top |
|---|---|---|
| Primer on the face | Bonds to the pretreated metal and gives the topcoat a sound base, adding corrosion protection | A weather-facing topcoat such as polyester or PVDF |
| Backer coat (reverse side) | Protects the side of the strip that faces the building, the panel core or the inside of a profile | Usually nothing; the reverse side is not normally in sunlight |
| Interior uses | Provides an adhering, protective coat on parts that stay indoors | Depends on the appearance required |
The pretreatment, primer and topcoat guide explains how the layers are applied and cured on the line. When ordering, state what goes on both sides: the reverse side is a separate choice, and it matters for panels that are bonded, laminated or exposed on both faces.
What is an epoxy-PE coating?
Epoxy-PE pairs epoxy adhesion with a polyester topcoat. The epoxy layer bonds to the metal and adds corrosion protection, and the polyester on top takes the light and weather that epoxy handles poorly. It is a practical combination where corrosion is the main concern and a polyester appearance is enough.
Naming is not uniform across the trade, and an epoxy-PE coating can be described differently from one paint system to the next. Check the layer structure and coat build on the paint system data sheet, so both sides of the RFQ mean the same thing. For the polyester topcoat itself, see polyester coated aluminum coil.
How are adhesion and corrosion protection checked?
Adhesion of a coil coating is commonly checked with a tape test to ASTM D3359. Method B, for coatings thinner than 125 micrometers, applies to thin coil coatings; the cross-hatch adhesion test page explains how it is done and rated. Flexibility, which shows whether the film keeps its grip when the strip is bent, is checked with a T-bend test to ASTM D4145 or EN 13523-7.
Corrosion behavior depends on the whole system, from pretreatment to topcoat, and on how cut edges and damage are handled. Salt spray exposure to ASTM B117 is one test buyers ask for; ASTM itself notes that salt spray results used alone have seldom been correlated with performance in natural environments. The aluminum corrosion guide covers how coated aluminum corrodes and how the coating system helps prevent it.
Epoxy and epoxy-PE coated coil from Orbit.
What Orbit confirms for coated coil. Anything not listed here is available on request and confirmed per order.
| Coating systems | Epoxy and Epoxy-PE are among Orbit's confirmed systems: PE, HDPE, PVDF, PU, PUPA, Epoxy, Acrylic and Epoxy-PE |
|---|---|
| Substrate | Aluminum in 1xxx, 3xxx and 5xxx series alloys. 3105 is the main coated substrate. |
| Coated thickness | Up to 1.60 mm |
| Coated width | Up to 1350 mm |
| Coil weight | Up to 10 tonnes |
| Color | RAL or custom color matching |
| Warranty | 5 to 20 years, depending on application and environment |
| Minimum order | 6.5 MT, typically 6 MT per color on coating |
| Standards and documents | ASTM or EN depending on market. Material certificates with every batch. |
| Test data for an epoxy or epoxy-PE system | Available on request |
Slitting, cut-to-length and embossing are done on the same site, so coated coil can ship as master coil, slit coil or sheet. See color coated aluminum coil for the product as a whole and the finishes page for face finishes.
How to specify epoxy or epoxy-PE
An order that uses epoxy is quicker to quote, and easier to check on delivery, when the specification covers these points:
- Face and reverse: the system on each side, for example a polyester face over epoxy primer with an epoxy backer.
- End use: interior or exterior, and whether the reverse side is bonded, laminated or visible.
- Color and gloss: a RAL number or a physical sample for the face, plus the gloss level.
- Alloy, temper, thickness and width: the substrate has to suit the forming step as well as the coating.
- Test data: the properties and methods you want reported, such as adhesion, T-bend and salt spray.
- Quantity per color: each color is a separate coating run.
Orbit replies to an RFQ within one business day.
Epoxy coating questions.
Why is epoxy not used as an exterior topcoat?
Epoxy has poor UV stability. In sunlight the film chalks and changes color, so on exterior faces it is used under a topcoat rather than as the outer coat.
What is a backer coat?
A backer coat is the coat on the reverse side of the coil, the side that usually faces the building, the panel core or the inside of a profile. Epoxy is used there for its adhesion and protection.
What does epoxy-PE mean?
Epoxy-PE pairs epoxy adhesion with a polyester topcoat. Naming varies between paint systems, so confirm the layer structure on the data sheet.
Can epoxy coated aluminum be used indoors?
Yes. Interior uses are one of the main applications for epoxy, because the UV weakness that limits it outdoors does not apply in the same way indoors.
How is adhesion of an epoxy primer tested?
Commonly with a tape test to ASTM D3359, using Method B for thin coatings, and with a T-bend test to ASTM D4145 or EN 13523-7. Orbit provides test data for a system on request.
What is the minimum order for an epoxy coated color?
The minimum order is 6.5 MT, and coating is typically run at 6 MT per color.
Epoxy coated coil to quote?
Send the end use, face and reverse coating, alloy, thickness, width, color, quantity and destination. We respond to RFQs within one business day.
