Coating system · Fluoropolymer

PVDF coated aluminum coil.

PVDF coated aluminum is coil painted on a continuous line with a fluoropolymer topcoat. It is a coating system specifiers choose when color and gloss have to hold for years under strong sun, salt air or polluted city air. Orbit applies PVDF coating in Aqaba, Jordan, on aluminum it casts and rolls on the same site.

  • Coated coil up to 1.60 mm thick
  • Up to 1350 mm wide
  • RAL or custom color
  • MOQ 6.5 MT

What is PVDF coating?

PVDF stands for polyvinylidene fluoride, a fluoropolymer resin. In a PVDF coating, that resin is the main binder in the topcoat: the part of the paint film that holds the pigment and faces the weather. The carbon-fluorine bond is among the strongest in organic chemistry, and ultraviolet light degrades PVDF far more slowly than it degrades polyester resins. That is the reason a PVDF finish chalks and fades more slowly than a polyester finish in the same exposure.

Architectural PVDF paints are described as 70/30 or 70 percent PVDF. The figure refers to the resin (binder) part of the coating: about 70 percent of the resin is PVDF by weight, and the remainder is another resin, typically acrylic, which helps the film flow, wet the pigment and bond to the primer. Pigment and other ingredients are counted separately, so a 70 percent PVDF coating is not 70 percent PVDF by total weight.

On a coil line the system goes on in layers. The strip is cleaned and pretreated, a primer is applied and cured, then the PVDF color coat is applied and cured. Some metallic and bright colors use a clear coat over the color coat; the paint system data sheet states the coat build. The coil coating process guide walks through each stage.

Where is PVDF coated aluminum coil specified?

PVDF is specified where the finish is visible, hard to reach for repainting, and exposed. Typical cases:

  • Facades and cladding: rainscreen panels, cassettes and composite panel skins, where a color shift between elevations would show.
  • Architectural roofing: standing seam and profiled roofs with long design lives.
  • Coastal and high-UV sites: buildings near the sea or in strong sun, where salt and ultraviolet light shorten the life of lower-cost systems.
  • Signature colors: corporate or project colors that have to stay close to the approved sample.

In North America, many architectural specifications name a performance standard rather than a chemistry. FGIA publishes three tiers, AAMA 2603, 2604 and 2605, with AAMA 2605 the most demanding, and 70 percent PVDF systems are formulated to meet it. If your specification names a standard, send it with the RFQ: test reports for a given system and color are available on request. For facade work, the PVDF facade and cladding specification notes list what a panel maker should settle before ordering, and the aluminum cladding page covers the coil itself.

How does PVDF compare with PE and HDPE?

All three are applied the same way and can be formed after painting. They differ in how long the color and gloss last outdoors and in price. Standard polyester (PE) costs least and suits interiors and sheltered or moderate exposure. High-durability polyester (HDPE) is formulated for better outdoor durability than standard polyester, at a moderate premium. PVDF costs most and keeps its appearance longest in strong sun and coastal air. The choice is usually made on exposure first and budget second. The full side-by-side is in the PE vs PVDF vs HDPE comparison, and the polyester coated aluminum page covers PE on its own.

What is Kynar 500?

Kynar 500 is a registered trademark of Arkema for a PVDF resin sold to licensed paint makers. It is a resin brand, not a paint and not a coil product: the paint maker formulates the coating, and the coil coater applies it. Because the name is so widely used in architectural specifications, buyers often write "Kynar" when they mean a 70 percent PVDF finish in general.

Orbit does not state a resin brand on this page. If your specification names a resin brand or a particular paint system, include that wording in the RFQ and Orbit will confirm what can be supplied for your color and quantity.

PVDF coated aluminum coil from Orbit.

What Orbit confirms for coated coil. Anything not listed here is available on request and confirmed per order.

Orbit coated aluminum coil: confirmed supply data
SubstrateAluminum in 1xxx, 3xxx and 5xxx series alloys. 3105 is the main coated substrate.
Coated thicknessUp to 1.60 mm
Coated widthUp to 1350 mm
Coil weightUp to 10 tonnes
ColorRAL or custom color matching
FinishesSolid, metallic, woodgrain, brushed, matte, gloss and textured
Warranty5 to 20 years, depending on application and environment
Minimum order6.5 MT, typically 6 MT per color on coating
Standards and documentsASTM or EN depending on market. Material certificates with every batch.
Test data for a PVDF systemAvailable on request

Slitting, cut-to-length and embossing are done on the same site, so PVDF coated coil can ship as master coil, slit coil or sheet. See prepainted aluminum coil for the product itself and aluminum coil finishes for the finish options.

How to specify a PVDF finish

A PVDF order is easier to quote, and easier to check on delivery, when the specification covers these points:

  • Standard or performance level: the document the finish has to meet, if your project names one.
  • Color and gloss: a RAL number or a physical sample, plus the gloss level. Metallic colors need a physical sample and an agreed viewing direction. The RAL and custom color guide explains what to send.
  • Coats and sides: the topcoat system on the face, and what goes on the reverse side.
  • Alloy, temper, thickness and width: the substrate has to suit the forming step as well as the coating.
  • Exposure: distance from the coast, industrial atmosphere and the part of the building, because warranty terms depend on them.
  • Quantity per color: each color is a separate coating run.

Orbit replies to an RFQ within one business day.

PVDF coating questions.

What does PVDF stand for?

PVDF stands for polyvinylidene fluoride, a fluoropolymer resin used as the main binder in high-durability architectural coil coatings.

What does 70/30 PVDF mean?

It describes the resin part of the coating: about 70 percent of the resin is PVDF by weight, and the remainder is another resin, typically acrylic. Pigments and other ingredients are counted separately.

Is PVDF coating the same as Kynar 500?

No. Kynar 500 is a registered trademark of Arkema for a PVDF resin sold to licensed paint makers. PVDF coating is the general term for a paint whose main resin is PVDF, whichever resin brand it uses.

Can PVDF coated aluminum coil be formed after painting?

Yes. Coil coatings are designed to be formed after painting. How tight a bend the finish will take depends on the alloy, temper, thickness and coating system, so state the forming step in your RFQ.

What sizes does Orbit supply in PVDF coated aluminum coil?

Orbit supplies coated aluminum coil up to 1.60 mm thick and up to 1350 mm wide, in coils up to 10 tonnes. Slit widths and cut-to-length sheet are available on request.

What warranty applies to PVDF coated coil?

Orbit's warranty runs from 5 to 20 years depending on the application and the environment. The term for a given order is confirmed at quote stage.

What is the minimum order for a PVDF color?

The minimum order is 6.5 MT, and coating is typically run at 6 MT per color.

PVDF project to quote?

Send the application, alloy, thickness, width, color, quantity and destination, plus any standard your specification names. We respond to RFQs within one business day.

Request a Quote