Finish · Printed pattern
Wood grain aluminum, in coil and sheet.
Wood grain aluminum is coated coil with a printed timber pattern over a base color, usually sealed under a clear coat. It gives the look of wood on parts that have to stay straight, light and free of rot. Orbit coats it in Aqaba, Jordan, on aluminum it casts and rolls itself, with patterns supplied on request.
- Coated coil up to 1.60 mm thick
- Up to 1350 mm wide
- Patterns on request
- MOQ 6.5 MT
How is a wood grain finish made on coil?
In general coil-coating practice, a wood grain finish is built in layers on a continuous line. The strip is cleaned and pretreated, then primed. A base coat in the background color of the timber goes on next and is cured. The grain is then printed over the base coat, often with a clear coat on top to protect it; methods vary by line. The clear coat also sets the final gloss.
Because the pattern is printed from a rotating roll, it repeats at a fixed interval along the length of the strip. That repeat, and the direction of the grain relative to the coil, matter when panels are laid side by side.
Orbit confirms the production method for a given pattern per order. The coil coating process guide explains the pretreatment, primer and cure steps that sit under any printed finish.
Where is wood grain aluminum used?
In the wider market, wood grain coated aluminum is used where a building or product calls for a timber look but real wood would need painting, sealing or replacing. Typical uses:
- Soffit and fascia: roofline trim that is hard to reach for maintenance.
- Shutters: rolling and fixed shutters on homes and shopfronts. See the roller shutter coil page for the substrate side.
- Cladding: wall panels and feature areas that pair a wood appearance with a metal panel system.
- Garage doors: sectional door skins formed from painted coil.
Wood grain aluminum sheet is cut from the same coated coil, so a fabricator can order master coil, slit coil or cut sheet depending on the forming line. Wood grain is one of several finishes for coated coil that Orbit supplies.
What decides how long the wood grain finish lasts?
The print is only one layer. How well the color and gloss hold outdoors depends mainly on the coating system under and over it: the resin in the base coat and in the clear coat. In the same exposure, a fluoropolymer system will usually keep its appearance longer than a standard polyester, at a higher price. For strong sun or coastal sites, compare the PVDF coated aluminum option. For sheltered or moderate exposure, and for interiors, a polyester coated aluminum system is often enough.
Tell Orbit where the part will be installed and which way it faces. Warranty terms run from 5 to 20 years depending on the application and environment, and the term for a wood grain order is confirmed at quote stage.
| Substrate | Aluminum in 1xxx, 3xxx and 5xxx series alloys. 3105 is the main coated substrate. |
|---|---|
| Coated thickness | Up to 1.60 mm |
| Coated width | Up to 1350 mm |
| Coil weight | Up to 10 tonnes |
| Coating systems | PE, HDPE, PVDF, PU, PUPA, Epoxy, Acrylic, Epoxy-PE. System for a given pattern confirmed per order. |
| Patterns | On request |
| Warranty | 5 to 20 years, depending on application and environment |
| Minimum order | 6.5 MT, typically 6 MT per color on coating |
What to approve on a wood grain sample
Wood grain coil is ordered against a physical sample. Patterns are available on request, so send a sample of the look you want, or ask for the patterns Orbit can offer for your coating system. Before the production run, approve a coated sample on these points:
- Pattern repeat: how often the grain repeats along the strip, and whether the repeat will be visible across your panel width or length.
- Grain direction: which way the grain runs relative to the coil length, and how your panels are cut and formed from it.
- Color under agreed light: base color and print color judged under a light source both sides agree on, since printed patterns can look different under daylight and shop lighting.
- Gloss: the gloss level of the clear coat, which changes how natural the grain looks.
For a large project, keep panels for one elevation from the same production batch where possible. Every batch ships with material certificates. Wood grain aluminum coil is part of Orbit's range of prepainted aluminum coil, and Orbit replies to an RFQ within one business day.
Wood grain questions.
How is a wood grain pattern applied to aluminum coil?
In general practice the grain is printed onto a cured base coat on the coil line, and a clear coat is usually applied over it. Orbit confirms the method for a given pattern per order.
Which wood grain patterns does Orbit offer?
Patterns are supplied on request. Send a sample of the look you need, or ask which patterns can be supplied in your coating system and quantity.
Is wood grain aluminum suitable for outdoor use?
It can be, when the coating system suits the exposure. Durability depends mainly on the resin in the base coat and clear coat, so state the site conditions in your RFQ, and confirm color retention and warranty terms for the wood grain finish specifically at quote stage.
Can wood grain coated coil be formed after painting?
Coil coatings are designed to be formed after painting. How tight a bend the finish will take depends on the alloy, temper, thickness and coating system, so state the forming step in your RFQ.
Can Orbit supply wood grain finish as sheet?
Yes. Slitting and cut-to-length are done on the same site, so wood grain coated coil can ship as master coil, slit coil or sheet. Slit widths and sheet lengths are confirmed per order.
What is the minimum order for a wood grain finish?
The minimum order is 6.5 MT, and coating is typically run at 6 MT per color.
Wood grain project to quote?
Send the application, pattern sample, alloy, thickness, width, quantity, site exposure and destination. We respond to RFQs within one business day.
