Reference · Properties
Is aluminum magnetic? What actually happens.
No, not in any practical sense. Aluminum is very weakly paramagnetic, so a magnet does not stick to it. A strong magnet moving near aluminum does meet resistance, but that comes from eddy currents induced in the metal, not from attraction.
- Very weakly paramagnetic
- A magnet does not stick
- Eddy currents cause drag
Is aluminum magnetic, and why not?
Materials respond to a magnetic field in different ways. Ferromagnetic metals, such as iron, nickel, cobalt and carbon steel, are strongly attracted to a magnet and can be magnetized themselves. Their atoms' magnetic moments line up together in small regions called domains, and those regions align with an applied field.
Paramagnetic materials, aluminum among them, are attracted to a field only very weakly, and only while the field is applied. The effect is so small that it takes laboratory instruments to detect it. A shop magnet, a lifting magnet or a magnetic base has nothing to grip, and aluminum does not stay magnetized once the field is removed.
The common wrought aluminum alloys, including the 1xxx, 3xxx and 5xxx series used for sheet and coil, behave the same way in practice. The product form does not change this either: sheet, coil, foil and plate are no more magnetic than a solid block. Some alloys that contain aluminum, such as Alnico magnet alloys, are strongly magnetic because of their iron, nickel and cobalt, not the aluminum.
Eddy currents: why a magnet seems to drag on aluminum
Aluminum conducts electricity well. When a magnet moves near a conductor, or a conductor moves through a magnetic field, the changing field induces circulating electric currents in the metal, called eddy currents. Those currents set up their own magnetic field, which opposes the change that created them. The result is a force that resists the motion.
Two common demonstrations show it. Drop a strong magnet down a vertical aluminum tube and it falls slowly, because the tube resists its motion all the way down, while a non-magnetic object of the same size falls straight through. Slide a strong magnet across a thick aluminum plate and it meets noticeable resistance when moved quickly, less than on copper, and it does not cling when it stops.
In both cases the force exists only while something moves. Hold the magnet still against the aluminum and there is no noticeable pull. That is the difference between induction and magnetic attraction.
How eddy currents sort aluminum scrap
Recyclers use the same effect to separate aluminum from mixed scrap. Ferrous metal is removed first with a magnet. The remaining stream then passes over an eddy current separator, a fast-spinning rotor of magnets. The rotor induces currents in conductive non-ferrous pieces such as aluminum, and their field opposes the rotor's field, so those pieces are thrown clear of the non-metallic material, which drops off the end of the belt.
Sorting is an early step in returning scrap to the melt. Aluminum recycling is one of Orbit's capabilities, alongside casting, hot and cold rolling and coil coating in Aqaba, Jordan. The page on Orbit's recycling loop from scrap to coil explains how recycled metal becomes new coil there.
How to tell aluminum from steel in the shop
A magnet is the fastest check, and a few other observations back it up. None of them identifies an alloy.
| Check | Aluminum | Carbon steel | Limits |
|---|---|---|---|
| Magnet | Does not stick | Sticks | Does not separate aluminum from non-magnetic stainless or other non-ferrous metals |
| Weight | Much lighter for the same size | Much heavier | Compare pieces of the same dimensions |
| Color of bare metal | Silvery white, dulling to gray | Darker gray | Not usable on painted or plated parts |
| Corrosion | White, powdery deposit, no red rust | Red-brown rust | Clean or coated surfaces show neither |
If a magnet sticks to an "aluminum" part, the magnet has usually found steel. Look for steel fasteners, rivets, inserts or brackets, or a steel substrate under a painted finish. Painted steel and painted aluminum coil can look the same once coated, so a magnet is a quick way to tell them apart on receipt. Orbit supplies both prepainted aluminum and prepainted steel coil, and the material certificate supplied with every batch states what was shipped.
A magnet alone does not prove aluminum
Some stainless steels, such as the austenitic grades, are non-magnetic or only weakly magnetic, and can become noticeably magnetic after heavy cold working. Copper, brass and zinc do not attract a magnet either, and titanium is not noticeably attracted. A part that ignores a magnet may be a non-ferrous metal, a non-magnetic stainless steel or a non-metal, not necessarily aluminum. Weight and color narrow it down; the mill certificate, or a laboratory analysis or a handheld analyzer set up for aluminum alloys, settles it.
For bare aluminum stock, Orbit rolls aluminum coil from 0.20 to 2.00 mm thick and up to 1650 mm wide in 1xxx, 3xxx and 5xxx alloys, with a material certificate for every batch.
Magnetism questions.
Is aluminum magnetic?
No, not in practice. Aluminum is very weakly paramagnetic, so the attraction is far too small for a magnet to stick to it.
Is aluminum sheet magnetic?
No. Sheet, coil, foil and plate behave like any other aluminum. Painted aluminum sheet is not magnetic either, so if a magnet sticks to painted sheet, the substrate is probably steel.
Why does a magnet fall slowly through an aluminum tube?
The falling magnet induces eddy currents in the tube. Their magnetic field opposes the magnet's motion, which slows it down. This is induction, not attraction, and it stops when the motion stops.
Can aluminum be magnetized?
No. Unlike iron and carbon steel, aluminum does not stay magnetized once a magnetic field is removed.
How is aluminum separated from steel in recycling?
A magnet removes the ferrous metal first. An eddy current separator then uses a fast-spinning magnet rotor to induce currents in aluminum and other conductive non-ferrous pieces, which throws them clear of the non-metallic material.
Is stainless steel magnetic?
It depends on the grade. Austenitic stainless steels are non-magnetic or only weakly magnetic, while other stainless families are magnetic. That is why a magnet alone cannot confirm that a part is aluminum.
Need certified aluminum coil?
Send the alloy, temper, thickness, width, quantity and destination. Material certificates come with every batch, and we respond to RFQs within one business day.
