Resources · Standards

Aluminum coil standards: ASTM, EN and inspection documents.

Aluminum coil standards fix what a buyer receives: the alloy and temper, the mechanical properties, the dimensional tolerances, the paint system on coated coil and the paperwork that proves it. This section explains the ASTM and EN documents that appear on coil orders and how they fit together on one purchase order.

  • ASTM B209 and ANSI H35
  • EN 485, EN 573, EN 515 and EN 1396
  • EN 10204 inspection documents

Which standards apply to coil and coated coil?

Each page below explains one standard or group of standards in buyer terms. None of them reproduces the values in the standards, which are copyrighted and sold by their publishers.

ASTM B209

The ASTM specification for aluminum and aluminum-alloy sheet and plate, including coiled sheet. It sets requirements by alloy and temper. US dimensional tolerances are set separately in ANSI H35.2.

ASTM B209 explained

EN 485, EN 573 and EN 1396

The European standards for flat-rolled aluminum: EN 485 in four parts for delivery conditions, mechanical properties and tolerances, EN 573 for alloy designation and composition, and EN 1396 for coil coated sheet and strip.

European aluminum standards

EN 10204 inspection documents

The standard that defines the types of inspection document a supplier can issue, from a declaration of compliance (type 2.1) to a certificate validated by the purchaser or an official inspector (type 3.2).

EN 10204 3.1 certificate

AAMA 2603, 2604 and 2605

FGIA's performance specifications for organic coatings on architectural aluminum. FGIA groups them as its "good, better, best" finishes; AAMA 2605 is titled Superior Performing Organic Coatings. They describe the paint, not the metal underneath.

How do the standards fit together on one order?

No single document covers a coil from melt to delivery. A complete order usually names a standard from each of four groups, and each group answers a different question.

Four groups of standards that can appear on one coil order
GroupExamplesQuestion it answers
Product standardsASTM B209; EN 485 parts 1 to 4What the delivered sheet or coil must meet: mechanical properties, tolerances, inspection and delivery conditions
Designation standardsEN 573; ANSI H35.1; EN 515What the alloy and temper codes mean, and the composition limits behind an alloy designation
Coated coil standardsEN 1396What applies to coil coated sheet and strip for general applications
Inspection documentsEN 10204What kind of document proves conformity, and who validates it

In practice an order line might read: product standard, then alloy and temper in the designation system that standard uses, then thickness, width and finish, and for coated coil the paint system and color. The inspection document type goes on the order as a separate line. ASTM and EN are separate systems, so pick one for the metal and name it consistently; a certificate is issued against the standard named on the order.

Designation standards are easy to overlook because they rarely appear by name. They sit behind the codes: "3003-H14" means something only because a designation standard defines both halves of it.

Ordering to ASTM or EN from Orbit

Orbit supplies to ASTM or EN standards depending on the market, with material certificates with every batch. State on the RFQ which standard governs the metal, which document type you need and, for coated coil, the paint system. Orbit is an integrated manufacturer in Aqaba, Jordan, making rolled aluminum coil in the 1xxx, 3xxx and 5xxx series and coated coil from its own coil coating operation, and is certified to ISO 9001, ISO 14001 and ISO 45001.

Standards questions.

Which standard should an aluminum coil order name?

Name one product standard for the metal, such as ASTM B209 or EN 485, with the alloy, temper, thickness, width and finish. Add the coated coil requirements if the coil is painted, and the inspection document type you need.

Can one coil be certified to both ASTM B209 and EN 485?

Only if the order names both and the material is tested and reported against each. The two systems were written separately, so do not assume material certified to one meets the other.

Do AAMA specifications cover the aluminum itself?

No. AAMA 2603, 2604 and 2605 cover the performance of organic coatings on architectural aluminum. The metal is specified separately, for example to ASTM B209 or EN 485.

Does Orbit supply certificates with its coil?

Yes. Orbit supplies to ASTM or EN standards depending on the market, with material certificates with every batch. State the standard and the document type you need on the RFQ.

Ordering coil to a standard?

Send the standard, alloy, temper, thickness, width, finish, document type, quantity and destination. We respond to RFQs within one business day.

Request a Quote