Finishes · Color, gloss, pattern, texture
Aluminum coil finishes.
Aluminum coil finishes decide how a coated surface looks: its color, gloss, pattern and texture. Orbit supplies seven appearance finishes and two functional finishes on coated coil, from plain solid colors to wood grain, textured, anti-graffiti and anti-bacterial finishes, each applied within one of its coating systems in Aqaba, Jordan.
- Seven appearance finishes and two functional finishes
- RAL or custom color
- Coated coil up to 1.60 mm thick
- Up to 1350 mm wide
Which aluminum coil finishes does Orbit supply?
These are the finishes for prepainted aluminum that Orbit confirms. Availability of a finish in a given coating system and color is confirmed per order.
Solid
One uniform, opaque color across the coil. Used on roofing, gutters, rolling shutters, cladding and truck and trailer panels.
Metallic
Metallic flake in the paint film gives a sheen that changes with the viewing angle. Often chosen for facades, composite panels and signage where a metal look is wanted.
Wood grain
A printed timber pattern over a base color, usually protected by a clear coat. Used on soffits, fascias, shutters, garage doors and cladding.
Wood grain aluminumBrushed
A fine, directional line pattern that gives the look of brushed metal. Used on interior panels, composite panels, signage and trim.
Matte
A low-gloss surface that reflects less light and can make minor marks and slight panel waviness less visible. Used where glare is unwanted, on facades, roofs and interiors.
Gloss
A smooth, reflective surface that shows color strongly. Used on signage, transport panels and other surfaces where a bright look matters.
Textured
Texture built into the paint film, such as a fine grain or wrinkle effect, while the metal itself stays flat. Helps hide handling marks on cladding, interior panels and shutters.
Textured aluminum sheet and coilAnti-graffiti
A finish designed so spray paint and marker can be cleaned off without damaging the color coat. Considered for public-facing panels, shutters and transport.
Anti-graffiti coated aluminumAnti-bacterial
A coating formulated with an additive intended to limit bacterial growth on the painted surface. Considered for healthcare, food handling and other hygiene-sensitive interiors.
Functional coatings for coilHow does finish relate to the coating system?
A finish is appearance: color, gloss, pattern and texture. A coating system is the resin chemistry of the paint, and it sets how long that appearance lasts and how the film stands up to sunlight, weather, chemicals and forming. Orbit applies PE, HDPE, PVDF, PU, PUPA, Epoxy, Acrylic and Epoxy-PE systems.
You choose a finish within a coating system, not instead of one. A matte polyester and a matte PVDF can look much the same when new, yet in the same strong sun the PVDF will usually hold its color and gloss longer. The sensible order is to pick the system for the exposure first, then the finish. Not every finish is offered in every system and color, so Orbit confirms the combination at quote stage. The overview of coating systems Orbit applies explains what each resin is suited to.
| Property | Set mainly by |
|---|---|
| Color and gloss level | Finish |
| Pattern or texture | Finish |
| Color and gloss retention outdoors | Coating system |
| Chemical and abrasion resistance | Coating system |
| Warranty term | Coating system, application and environment (5 to 20 years) |
RAL and custom color matching
Solid colors can be ordered by RAL number or matched to a customer sample. A RAL number identifies a color, and most RAL Classic numbers are solid colors. It does not by itself define a metallic flake, a wood grain print, a brushed pattern or a texture, so effect finishes are agreed on a physical sample. For those finishes, send a physical sample and agree the viewing conditions: the light source, the viewing angle and, for directional finishes, which way the sample is held.
Whatever the finish, approve a coated sample before the production run, and check gloss as well as color, since the same color at a different gloss level looks different. The guide to RAL vs custom color matching covers what to send and what to expect.
Finish questions.
What is the difference between a finish and a coating system?
The finish is how the surface looks: color, gloss, pattern and texture. The coating system is the resin chemistry, such as polyester or PVDF, that sets durability. A finish is chosen within a coating system.
Which finishes does Orbit supply on coated aluminum coil?
Solid, metallic, wood grain, brushed, matte, gloss, textured, anti-graffiti and anti-bacterial. Whether a finish is available in a given coating system and color is confirmed per order.
Can any RAL color be supplied in any finish?
Solid colors can be ordered by RAL number or matched to a sample. For metallic, wood grain, brushed and textured finishes the combination of color, finish and coating system is confirmed per order against a physical sample.
Is a textured finish the same as embossed aluminum?
No. A textured finish is built into the paint film and the metal stays flat. Embossing rolls a pattern into the metal itself, which changes its shape and can add stiffness. Orbit does both.
What is the minimum order for a finish?
The minimum order is 6.5 MT, and coating is typically run at 6 MT per color.
Finish to quote?
Send the application, finish, color reference or sample, coating system if known, alloy, thickness, width, quantity and destination. We respond to RFQs within one business day.
