Coating system · Polyester
Polyester coated aluminum coil.
Polyester coated aluminum coil is aluminum painted on a continuous line with a polyester topcoat. It is commonly chosen for interiors, gutters and moderate outdoor exposure, where a wide color range and good formability matter more than the longest possible color life. Orbit applies polyester systems in Aqaba, Jordan, on aluminum it casts and rolls on the same site.
- Coated coil up to 1.60 mm thick
- Up to 1350 mm wide
- RAL or custom color
- MOQ 6.5 MT
What is a polyester coil coating?
A polyester coating is a paint whose binder, the resin that holds the pigment and forms the film, is a polyester resin. On a coil line the paint is applied as a liquid by roller and then cured in an oven, where the resin cross-links into a hard, flexible film. Because the strip is painted flat and formed afterward, the film has to stretch and bend with the metal without cracking or losing adhesion.
The finished system is built in layers. The aluminum is cleaned and pretreated, a primer is applied and cured, and the polyester color coat goes on top. The pretreatment, primer and topcoat guide explains each stage of the line.
In the trade, "PE" is the short name for standard polyester. A PE coated aluminum coil is, in short, coil with this standard polyester topcoat. Its strengths are a broad color range, good formability and, usually, a lower price than fluoropolymer systems. Its limit is ultraviolet light: over years outdoors, ultraviolet light and moisture gradually degrade the polyester resin, and the surface slowly chalks and loses gloss and color.
Where is PE coated coil used?
Standard polyester suits work where the finish sees little sun, or where the part has a moderate design life:
- Interior uses: ceilings, partitions, interior wall linings and other indoor panels.
- Gutters and downspouts: profiles roll formed from narrow coil, where formability and color range count. The aluminum gutter coil page covers the coil for this market.
- Moderate outdoor exposure: sheltered elevations, soffits and areas away from the coast and from heavy industrial air.
For strong sun, coastal sites or long design lives, a higher-durability polyester or a fluoropolymer system is usually the better match. The guide to choosing a coating system by environment sets out how exposure drives that choice.
What is siliconized polyester (SMP coating)?
SMP stands for silicone-modified polyester: a polyester resin that has been chemically modified with silicone. SMP adds silicone resin to a polyester to improve its resistance to ultraviolet light. It is generally rated between standard polyester and 70 percent PVDF, and the exact gain over PE depends on the formulation and the color.
Is SMP available from Orbit?
Orbit's confirmed coating systems are PE, HDPE, PVDF, PU, PUPA, Epoxy, Acrylic and Epoxy-PE. SMP is not on that confirmed list. It is available on request: if your specification calls for siliconized polyester, say so in the RFQ, and Orbit will confirm per order whether it can be supplied for your color, thickness and quantity, or propose a confirmed system for the same exposure.
How do PE, HDPE and PVDF compare?
They differ mainly in how long color and gloss last outdoors, and in price. Standard PE usually costs least and fits interiors and moderate exposure. HDPE, high-durability polyester, is a polyester formulated for better outdoor durability than standard PE; performance depends on the paint system, so ask for its data. PVDF usually costs most and keeps its appearance longest in strong sun and coastal air. The full side-by-side, including how to pick between them, is in the PE vs HDPE vs PVDF comparison. For the fluoropolymer option on its own, see PVDF coated aluminum coil.
Which finishes and colors are available?
Polyester systems can be supplied in solid colors and in special finishes: metallic, woodgrain, brushed, matte, gloss and textured. Color is matched to a RAL number or to a custom sample. The RAL vs custom color guide explains what to send and how matching is checked. The full range is on the aluminum coil finishes page.
Polyester coated aluminum coil from Orbit.
What Orbit confirms for coated coil. Anything not listed here is available on request and confirmed per order.
| Substrate | Aluminum in 1xxx, 3xxx and 5xxx series alloys. 3105 is the main coated substrate. |
|---|---|
| Coated thickness | Up to 1.60 mm |
| Coated width | Up to 1350 mm |
| Coil weight | Up to 10 tonnes |
| Confirmed coating systems | PE, HDPE, PVDF, PU, PUPA, Epoxy, Acrylic and Epoxy-PE |
| SMP (silicone-modified polyester) | Available on request, confirmed per RFQ |
| Color | RAL or custom color matching |
| Finishes | Solid, metallic, woodgrain, brushed, matte, gloss and textured |
| Warranty | 5 to 20 years, depending on application and environment |
| Minimum order | 6.5 MT, typically 6 MT per color on coating |
| Standards and documents | ASTM or EN depending on market. Material certificates with every batch. |
| Test data for a polyester system | Available on request |
Slitting, cut-to-length and embossing are done on the same site, so polyester coated coil can ship as master coil, slit coil or sheet. See prepainted aluminum coil for the product as a whole.
How to specify a polyester finish
A polyester order is quicker to quote, and easier to check on delivery, when the specification covers these points:
- Coating system: PE, HDPE or another confirmed system. If you need SMP, name it so it can be confirmed per RFQ.
- Color and gloss: a RAL number or a physical sample, plus the gloss level.
- Coats and sides: the topcoat on the face and the coat on the reverse side.
- Alloy, temper, thickness and width: the substrate has to suit the forming step as well as the coating. For gutter work, the gutter coil specification notes list the usual choices to settle.
- Exposure: interior or exterior, distance from the coast and industrial atmosphere, because warranty terms depend on them.
- Quantity per color: each color is a separate coating run.
Orbit replies to an RFQ within one business day.
Polyester finish questions.
What is polyester coated aluminum coil used for?
It is used for interior panels, gutters and downspouts, signage and other parts with moderate outdoor exposure, where a wide color range and good formability matter more than the longest color life.
What does PE mean on a coated coil specification?
PE is the short name for standard polyester, the resin family used as the binder in the topcoat. HDPE is a higher-durability polyester, and SMP is a silicone-modified polyester.
What is the difference between SMP and standard polyester?
SMP is a polyester resin modified with silicone to improve its resistance to ultraviolet light. It is generally rated between standard polyester and 70 percent PVDF, and the exact gain over PE depends on the formulation and the color.
Does Orbit supply SMP coated aluminum coil?
SMP is not on Orbit's confirmed list of coating systems, which is PE, HDPE, PVDF, PU, PUPA, Epoxy, Acrylic and Epoxy-PE. It is available on request and confirmed per RFQ.
Can polyester coated aluminum be formed after painting?
Yes. Coil coatings are designed to be formed after painting. How tight a bend the finish will take depends on the alloy, temper, thickness and paint system, so state the forming step in your RFQ.
What is the minimum order for a polyester color?
The minimum order is 6.5 MT, and coating is typically run at 6 MT per color.
Polyester coil to quote?
Send the application, coating system, alloy, thickness, width, color, quantity and destination. We respond to RFQs within one business day.
