Choosing a Coating System by Environment: A Worksheet for Aluminum Coil.
Coating names read like a ladder, but the right rung depends on where the metal will live and what happens to it on the way there. A worksheet that starts from the environment gets to a defensible choice faster than a comparison of names.
Key takeaways
- Start from the environment, forming and appearance requirements, then ask which coating system suits them.
- Orbit names PE, HDPE, PVDF, PU, PUPA, Epoxy, Acrylic and Epoxy-PE. The system is chosen against the exposure and your specification.
- A 70:30 ratio alone does not show compliance with a performance specification. Test reports do.
- Orbit warranty runs 5 to 20 years depending on application and environment, and the term should be checked against your specification.
Why start from the environment instead of the name?
A system name tells you the resin family. It does not tell you what the coating has been shown to withstand, in what test, on what substrate. Two projects can use the same name and need different evidence, because one is a sheltered interior part and the other faces sun, rain and cleaning on a building. Writing down the conditions first turns the choice into a list of questions the supplier can answer with documents.
What goes into the worksheet?
| Factor | Question to answer | Ask the supplier for |
|---|---|---|
| Exposure | Interior, exterior inland, coastal, near industrial emissions? | The system recommended for that exposure and the basis for the recommendation |
| Sun and weather | How many years of exterior service does the project assume? | Weathering test reports and the warranty term |
| Forming | What is the bend radius against the thickness? | T-bend or equivalent result for the system on your substrate |
| Handling | Will the surface be abraded, rubbed or cleaned with agents? | Abrasion, hardness and cure evidence |
| Appearance | Which color, gloss and finish? | Sample approval and a written color tolerance |
| Term | What warranty does the buyer need? | The warranty text in writing |
The test results guide explains how to read the evidence that comes back.
What do the system names tell you?
The names point to a resin family, and Orbit's coatings page describes HDPE as a modified polyester engineered for better UV and weather resistance than standard PE. PVDF is a fluoropolymer. The other names, PU, Epoxy and Acrylic, indicate their own resin families. PUPA and Epoxy-PE are named systems on Orbit's list; ask the supplier for the composition and the evidence behind them.
A name narrows the question. It does not answer it. The PE, PVDF and HDPE comparison and the coatings overview go further on the systems they cover. If the substrate is steel rather than aluminum, see prepainted steel coil.
What does PVDF add to the picture?
The Fenestration and Glazing Industry Alliance (FGIA) groups AAMA 2603, 2604 and 2605 as its "good, better, best" category of aluminum finishes; AAMA 2605 is titled Superior Performing Organic Coatings (see FGIA: finishes documents (AAMA 2603, 2604, 2605)). A specification tier describes a performance bar, not a guarantee of service life.
State the PVDF content your specification names. A 70:30 ratio does not by itself show compliance with any performance specification, which is shown by test reports. The PVDF facade notes have the details.
What evidence should back a choice?
- Test reports for the system on a substrate like yours, with the standard and method named
- A sample coil or panel you can form and examine yourself
- The warranty text, including the exposure conditions it assumes
- A written color and gloss tolerance, if appearance matters
Orbit supplies material certificates with every batch and works to ASTM or EN depending on the market. Ask about any other document you need.
How would the worksheet work on a real project?
Take a roll-formed roofing profile near a coast. The worksheet entries are questions, not answers: exposure is coastal, forming is roll forming at the profile's bend radii, the project assumes long exterior service, and the buyer wants a written warranty. The request then reads: which system does the supplier recommend for coastal exposure on this alloy and gauge, what test reports support it, can the coating form at these radii, and what warranty term applies. The answers, not the system name, decide the choice. For roofing finishes in particular, the roofing finish options guide is the next read.
What if the project has two environments at once?
A building can combine a sheltered soffit and an exposed wall, or a coastal face and an inland face. Fill the worksheet once per condition rather than once per project, then ask whether one system covers all of them or whether the project needs more than one. Splitting the list keeps a mild condition from hiding a harsh one, and it shows where a single system is a compromise that the buyer should approve in writing.
Write the answers next to the order lines, so that the system, color and warranty term can be read together when the order is checked against the specification.
Common questions
Which coating system is right for exterior use?
That depends on the exposure, the forming and the warranty required. Ask the supplier which system it recommends for your conditions and for the test reports behind it.
Does a 70:30 PVDF ratio show compliance with a performance specification?
No. The ratio is a composition statement, not a test result. Compliance with a performance specification is shown by test reports.
What warranty does Orbit offer?
Warranty runs 5 to 20 years depending on application and environment. The term should be checked against your specification.
References
- FGIA: finishes documents (AAMA 2603, 2604, 2605): FGIA lists the AAMA 2603, 2604 and 2605 finishes documents and calls them "good, better, best".
- Orbit coatings overview: the coating systems Orbit lists.
Matching a system to a site?
Send the exposure, forming operation, color and finish, gauge and quantity. Replies arrive within one business day.
