PPGI vs PPGL: Prepainted Galvanized vs Galvalume Steel.
PPGI vs PPGL is a question about what sits under the paint. PPGI is prepainted galvanized steel, with a zinc metallic coating; PPGL is prepainted steel with a 55% aluminum-zinc (Galvalume-type) coating. The paint on top can be the same, but the substrate decides how the sheet behaves wherever the paint is cut, scratched or worn through.
Key takeaways
- PPGI and PPGL are trade terms for prepainted steel. The difference is the metallic coating under the paint: zinc for PPGI, 55% aluminum-zinc for PPGL.
- The paint layers are applied the same way on both: cleaning, pretreatment, primer, topcoat and backcoat on a coil coating line.
- The substrate matters most at cut edges, scratches and fastener holes, where the paint no longer covers the steel.
- Neither is better for every project. Exposure, detailing and the paint system decide the choice.
What do PPGI and PPGL stand for?
Both are trade terms, not standard designations. PPGI is read as prepainted galvanized iron in the trade, although the base metal is steel: it means steel sheet with a hot-dip zinc coating, painted on a coil line. PPGL means prepainted steel whose metallic coating is a 55% aluminum-zinc alloy, the Galvalume-type coating, painted the same way.
Because the terms are informal, a quotation that only says PPGI or PPGL leaves a lot open. The steel grade, the metallic coating weight, the paint system and the film thickness all need stating separately.
PPGI vs PPGL: how do the substrates differ?
The difference is entirely in the metallic layer between the steel and the primer. The guide to Galvalume and galvanized coatings covers the bare products in more depth; the table summarizes what matters once they are painted.
| Point | PPGI | PPGL |
|---|---|---|
| Metallic coating | Zinc | About 55% aluminum, about 43% zinc and a small silicon addition |
| How it protects the steel | Sacrificial: zinc corrodes in place of the steel | Mainly barrier, with some sacrificial action from the zinc |
| Bare substrate specification (US) | Hot-dip zinc-coated sheet specification | ASTM A792 |
How each coating performs depends on coating weight, the exposure and the paint system; ask the supplier for performance data for the exposure in question. Under a sound paint film both coatings are shielded, so the comparison is mostly about what happens at damage and at edges.
What does the paint layer add?
On both products the strip is cleaned, pretreated, primed and topcoated, then cured, with a backcoat on the reverse side. The pretreatment chemistry has to suit the metallic coating it goes on, so the same topcoat over zinc and over aluminum-zinc may sit on different pretreatments. The paint carries color, gloss and much of the weathering performance. Our overview of coil coating systems explains how resin systems differ and why the system is chosen against the exposure.
In US practice, prepainted metallic-coated steel sheet for exterior building products has its own ASTM specification, separate from the specifications for the bare metallic-coated sheet. Ask which specification a quotation is written against.
Where does the substrate show through?
A painted sheet is only as good as its weakest exposed point. On formed and installed products, those points are:
- Cut edges. Slitting, shearing and site cutting expose steel and metallic coating at the edge.
- Fastener holes and punched features. Each hole is a small cut edge.
- Tight bends. Paint and metallic coating are stretched on the outside of a bend.
- Handling and site damage. Scratches through to the metallic layer.
At these points the metallic layer is what protects the steel. How far corrosion creeps under the paint from an edge depends on the exposure, the coating weights and the paint system, as well as on the choice of zinc or aluminum-zinc.
Where is each product used?
Both are used for roofing and wall sheet, rainware, garage and shutter doors, sandwich panel facings and appliance casings. PPGL is used for exterior roofing and walls. PPGI is used across exterior and interior building products and general fabrication. These are general patterns, not rules; project specifications and local practice vary.
If weight or rust at edges is the deciding factor, an aluminum substrate is a third option. Prepainted aluminum has no steel to rust, though it costs differently and is less stiff at the same thickness.
What should a PPGI or PPGL order state?
- The metallic coating, zinc or 55% aluminum-zinc, and its coating weight designation
- Steel grade, thickness and width
- The specification the prepainted sheet is ordered to
- Paint system, color and gloss for the topcoat, and the backcoat requirement
- Film thickness for each side, and the tests to be reported
- The exposure and the forming operation
Orbit sells prepainted steel coil. The steel substrate, gauge and paint details are confirmed per RFQ, so state whether you need a zinc or an aluminum-zinc substrate in your request.
Common questions
What does PPGI mean?
PPGI is a trade term for prepainted galvanized steel: steel sheet with a hot-dip zinc coating, painted on a coil coating line. It is often read as prepainted galvanized iron, although the base metal is steel.
What does PPGL mean?
PPGL is a trade term for prepainted steel with a 55% aluminum-zinc metallic coating, the Galvalume-type coating, painted on a coil coating line.
Is PPGL better than PPGI?
Not for every project. Performance depends on the coating weight, the exposure, the detailing and the paint system, so ask the supplier for performance data for the exposure in question.
Can the same paint system go on PPGI and PPGL?
Often yes, but the pretreatment has to suit the metallic coating underneath. Ask the supplier which pretreatment and primer are used on the substrate you are buying.
Is PPGI the same as prepainted aluminum coil?
No. PPGI has a steel base with a zinc coating. Prepainted aluminum coil has an aluminum base and no steel, so there is no steel to rust at cut edges.
References
- ASTM International: ASTM A792/A792M, the specification covering 55% aluminum-zinc alloy-coated steel sheet in coils and cut lengths.
- Orbit Aluminum Industries: Galvalume vs galvanized steel post, for the bare metallic coatings.
- Orbit Aluminum Industries: coating systems overview and prepainted steel coil product page.
Specifying prepainted coil?
Send substrate, coating system, color, gauge, width and exposure. We respond to RFQs within one business day.
